|
Wavegrinder,
I recently replaced the fin on my 9 footer with the
Wavegrinder Fin and took the board out for a test at San Onofre.
The fin worked great all around on a 1-4 foot surf with
glassy conditions all day. The first sensation I experienced is
the board paddled exceptionally fast
in fact I was surprised how fast I got out through the inside
surf. Catching the wave was much
quicker the board gained momentum with each stroke definitely a
plus when there is a crowd. Once I was on the wavethe board
would pick up speed faster then my regular fin and I could turn
the board in a tighter radius, a pivot type turn
with no loss of speed. The glide was great and nose
riding was smooth and effortless and cutbacks were also smooth.
The straight line speed had drive which amazed me for a
fin with a narrow base. I can't wait to get the fin out in
overhead surf.
Thanks Again,
C.
Had my first surf today using a
Wavegrinder Fin. Absolutely awesome! I
caught more waves in one session than I have had my last 3
sessions. It is far easier to catch
waves with, much faster in a straight line and way
faster coming out of turns. Every longboarder on Earth
should have one of these fins. If your
old mal is getting a bit stale, breathe some new life
in to it with a Wavegrinder! Way cheaper than a new board
- a blue chip investment. I loaned my
board to a 60 year old mal rider and after two
waves he was sold. Couldn't wait to hand over his money
to me in the car park!
Murray Ceff, Prop. Boards and Wetties,
B & W Surfboards, Victoria, Australia,
www.boardsandwetsuits.com.au
While waiting for my new board to
arrive, I ordered a Wavegrinder. After having ridden the new
board with the 2 +1 fins sent with it, I switched to the
Wavegrinder and went out in 5' to 7' surf. I was surprised how
much easier paddling out was and how much faster the board
seemed. Your fin performed just as advertised. I'm going to
order another for my noserider.
T. A.
I just want to give you some feed back.
I’m 6’1” 210 pounds. I prefer to ride short boards but when the
surf gets small or during the winter I will ride my long boards.
When I do ride them I tend to ride them more like a short board.
I like performance surfing. I read your ad and decided to give
it a try. I have had the wavegrinder for a few months and I love
it. I have it in a 9’1” McTavish Original. I rode it with two
FCS h2 side fins. I could immediately tell the difference in the
performance. Then I ran up to the nose and got the longest nose
ride of my life. Well the water started to warm up and the surf
has been goods I have been riding my short boards. A couple
weeks ago I went down to Hatteras, NC for a little vacation had
good surf all week. The swell did drop toward the middle of the
week so I pulled out my long board and was getting some good
rides. My buddy has never seen the wavegrinder before and I was
telling him about it. He asked if he could try my board and he
love it. He was getting sick rides. He said he wanted to barrow
my board for a contest. I told him it’s not the board, it’s the
fin. He didn’t want to give the board back. I gave him your web
page and he said he was going to order one. I’m getting this one
for a 9’6” Hamilton. Can’t wait.
Thanks, B.
Hey!! Just tried it out
on my Stand up paddle board. Amazing!! Thank you. What a
difference. #1 the board tracks better. # 2 Hauls ASS! # 3 turns
on a dime # 4 seems to lift my nose up when I'm doing long
powerful paddle strokes to get better speed # 5 Board seems more
stable...
All hard to believe, but I totally noticed the
difference immediately.
I did a special order with Val Surf in the 818...
My stand up paddle board is 11 feet by 30 inches and now
spins a 180 with one stroke...
Sincerely,
S. N.
Doug,
Just wanted to give you some positive feedback regarding the
wavegrinder
fin. I've been surfing it for a few weeks now and am completely
stoked.
First time out, I was most impressed by the projection out of
bottom turns
and the sensation of feeling the fin flying thru the water. Per
the
recommendation I had the fin a few inches back than normal for
me. The
next time out I moved it up about an inch and a half to see the
difference. Didn't work nearly as well. Interesting that the
placement
makes such a difference. Very seldom does any new product or
innovation
live up to claims, but the grinder exceeds by 100%. You've
increased my
stoke considerably, which I didn't think was possible. I wish
you much
well deserved success.
thx
DW
Doug,
The fins are AMAZING so much speed out of a turn and paddling
couldn't be easier my brother and I are very impressed. I've
been out several times this week and I couldn't be happier,
today was a little steep but the fin put me in quicker so I
was down the line before the wave could get me.All the short
borders hate me, they want to know if you are making a fin for
the short board.We are spreading the word so hopefully you
will get more orders. Bye the way the turning is so quick we
had to put the fin 3/4 of the way towards the back of the fin
box, with the fin in the same spot as the turbo tunnel my
brother kept throwing himself off his board it was so quick
Thanks for a great invention
Tom Blake would be proud
T .M.
Doug,
I Like it!!! Played in some 3-4’ stuff in HB this past weekend
and had great fun. Allowed me to get that 10-0 around pretty
quickly. Pretty steady at the nose too.
I had it moved about two inches behind where I usually place
the other fins.
Good fun…..I look forward to better waves with it.
A.A.
Doug,
Thank you very much for the extra plates and screws. I've
surfed the fin 4 times, the first 3 times it was mostly small.
I was surprised by how my board 9' surtec, expoxy, Takayama,
snapped off the top, and there was some speed to the bottom
turn. Yesterday I got it in head-high Torrey Pines. The board
seemed faster down the line, the snaps off the top and bottom
were no problem. We talked about how tight it was in the box,
and I remember you telling me to have the fin in the back of
the box. I'm gonna sand it down and move it back. the board
has alota tail rocker and I'm interested to see how it works
out. Thanks again. P.
Doug,
I agree about cold water. A guy needs to take it seriously!
I tried my fin today, and I was thrilled! The first thing I
noticed was that my board was easier to paddle. That, in and
of itself would be enough to keep the fin. Catching waves was
not easier, but the board felt faster after I was up and
riding. I'm not sure about turning. I didn't get a chance to
do very much turning. The board might have been a little more
responsive. I didn't change back to my Surf Co safety fin
because I only had an hours worth of daylight, and did not
want to spend any time changing fins. One other surfer admired
my fin in the parking lot, but I doubt he will be buying one.
He is an extremely fit guy in his late 20's, and as such he
could probably surf well on a door with no fin. He is such a
powerful paddler that I can often hear him paddling up behind
me. This in spite of my dry hood, and a howling wind. He made
this observation- "this fin might be good for nose riding. The
wings might help to keep the tail from rising up". I wish I
was capable of testing the nose riding potential of my fin,
but the closest I have ever been to riding the nose is a
cheater 5 on the nose art.
I'm thinking about getting into stand up paddle boards. Steve
at Infinity Boards has offered to: take me out this May, give
me some tips, and let me try different boards. I offered to
pay, and he said no!?? Wow !!! I have never met this guy. I
just sent him an e-mail with some questions. Do you think that
my Wavegrinder would be a good choice for a 12 ft long, 4inch
thick stand up paddle board?
One final thought for tonite, just thought that you would like
to know that your fin fit very well in my Stewart fin box.
Take care Doug, D.W. from Milwaukee
I loved the fin in the single fin shortboard. I tried it in a
bonzer 5 setup, and single fin gun, a couple of different
longboards, and a single fin shortboard. It worked far and
away the best in the single fin shortboard, and very good in
the bonzer too.
D.M.
Dear Sirs,
I gave that Wavegrinder fin a real workout in Baja over the
weekend and had a lot of fun with it. We had consistent glassy
surf for three days that ranged between 4’ and 10’. As an old
traditionalist it was quite different trying something that
new and I found it to be everything you said and more. My
turns were very smooth and the transitions from a cutback to a
bottom turn were fast and I didn’t notice any stalling,
obviously I really liked it! HOWEVER, kelp is not a good thing
for a vertical fin. For surfing Costa Rica, the Dominican
Republic and at home I will certainly be surfing the
Wavegrinder.
Regards,
T.C.
Well I finally got some decent surf in which to try your fin.
I LOVE IT!!!
It screams out of turns just as you promised, I just may have
to get a few more.... I promised to send photos of my
work, so enclosed you should find a few. Thanks again
for your fin, it brings yet more fun to my surf!
Aloha,
P. M.
Questions? Comments?
Contact us.
|